Every new car reviewed and rated by AllAutoExperts road test experts. Plus used car reviews, group tests and in-depth video reviews
Even though concepts don’t depict the real car that is going to be produced, but more of a philosophy and a general direction of design, we enjoy viewing them. In this area you’ll find the latest and most recent concepts from major car brands. You’ll also discover, not only real life concepts, but also exclusive sketches and blueprints of cars, and models that are yet to come.
With the number of heavy trucks constantly increasing, it was perfectly normal for the sustainable development requirements to affect these vehicles, as well, and improve their efficiency.
Walmart decided to make an entrance into the world of heavy trucks with the brand new WAVE concept, something that USA hasn’t yet seen. The aerodynamic design focuses in the middle position of the driver, unlike the standard left side.
The control of the truck is made through LCD screens placed around the steering wheel.The driver’s comfort has also been increased, by placing a sleeping compartment right in the back of the driver’s pod.
The technical details have been affected by the green current, so the propulsion system is electrical, of course. WAVE uses a Capstone micro-turbine, teamed up with an electric engine.
The trailer of the WAVE concept is made out of carbon fiber, which contributes to the truck’s light-weightiness. According to Walmart, this is the very first carbon fiber trailer ever, being with approximately 4000 pounds lighter than any other ordinary truck.
Talking about the trailer, it continues the aerodynamic design of the truck, by diminishing the wind resistance and also adding up some extra space for the load.
Although it sounds good on paper, there are no plans announced for WAVE to go into production. We would certainly like that, since it is very eco-friendly.
EPA has received instructions from President Obama to come up with a new set of fuel consumption economy for the medium and long trucks, which is supposed to take effect somewhere around 2019.
When you take passion and lots of imagination and put them together, you get Bugatti La Batarde.
This is what 3 professionals from Italy and Columbia came up with after some good hours of work spent in Photoshop, clay modeling and alias modeling.
Bugatti La Batarde is a project developed for the Bugatti brand, Volkswagen group at the sixth edition of the Politecnico Milano, the master in Auto Design. The concept was presented in July 2015, at the Audi Univers in Germany, Ingolstadt.
La Batarde tries to remake the classical lines, characteristic of Bugatti and upgrade it to a supercar, worthy of being called a piece of art.
Remember the Tron Lightcycle? Well, here is something newer! The Kruz-0R is exactly how you would imagine wildness riding on two wheels.
The concept incorporates a powerful big sized engine and positions the biker similarly to a sports bike, but doesn’t put too much pressure on him. The seat allows the rider to have a comfortable riding position and rest in the fuel tank.
Kruz rides on hubless wheels, which combined with the thin lateral profile, make this motorbike have the best aerodynamic ever. The wind becomes your friend with Kruz-0R.
The design is pretty aggressive and sportive, which makes Kruz the perfect choice for the wild riders looking for speed in style.
This is a new design study, signed by Mercedes Benz and presented at the Frankfurt Motor Show.
Mercedes Benz F700 Concept is a luxurious sedan, comprising all sort of new technologies which will be present in the future Mercedes Benz models.
Among all kind of interesting gadgets and technologies present in the Mercedes Benz F700 Concept, the DiesOtto powerplant deserves most of the attention.This is a 4 cylinder fuel engine, but with consumption similar to the diesel engines.
Considering the impressive sizes of Mercedes Benz F700 Concept – 5.18 m – the fuel consumption is quite extraordinary: only 5.3 liters per 100 km/h. This is equal to low emissions of only 127 g of CO2 per kilometer.
Mercedes Benz F700 Concept’s engine works with a hybrid starter and generator, with an automatic seven phase transmission. This entire system helps the car reach the first 100 km/h in 7.5 seconds. The car’s engine produces 238 hp, with an additional 20 hp coming from the electric engine. The torque reaches 400 Nm.
The F700 Concept can also brag with an active PRE-SCAN suspension, which clears the road ahead with two lasers and automatically adjusts the suspension to the road conditions.
The Human Machine Interface is also available in Mercedes Benz F700 Concept, which presumes a virtual assistant.
The coupe has distinctive protective elements in its front side and many more beautifully integrated details, like transparent rear wheel covers, for example.Mercedes Benz F700 Concept is the creation of Mercedes Advanced Design Studio from Irvine, California.
Even if you were the wealthiest man on Earth, you would still not be able to buy this long expected SUV right away,
Rolls Royce Cullinan is the first SUV that will be produced by this luxurious brand. It is assumed that this will be a boxy shaped car, that will preserve the elegancy characteristic of Rolls Royce.
The name Cullinan comes from the name of the biggest diamond ever used on a jewelry. The car is planned to be available for buying in 2018. The aluminum space frame will also serve as a base for the upcoming Rolls Royce models.
Rolls Royce Cullinan is planned to run on a modified V12 of 6.8 liters, from Phantom and is expected to have a hybrid,plug-in version as well.
We sure know that Bentley Bentayga has something to worry about now.
The Italian brand has organized the Top Design School Challenge, a contest that required the most important design schools to imagine the Ferrari of the year 2040.
The Ferrari Manifesto concept was chosen the winner of the competition, since it was the one that fitted the company’s vision most.
The first phase presumed reducing the participants’ number from 50 to 8 and, later, to 4. Each of the 4 competitors presented 3 models.
The Grand Prix went directly to Manifesto. The jury, formed of Ferrari passionate fans like Paolo Pininfarina, Flavio Manzoni and Nick Mason with Sebastian Vettel selected it as the best concept in the contest.
The Ferrari Manifesto concept exists only on paper, but it was enough to conquer the jury’s heart. The concept is signed by a Russian student.
This is an electric concept car, suitable for 2040, with 3D printing being an important part of it. Ok, 3D prints aren’t new to us, but the capacity of 3D printing developed by Luis Cordoba is something different.
Firanse R3 has been created by Luis for the future, approximately year 2040. He imagines 3D printing reaching some sort of revolution in that period and becoming more accessible.
The Firanse concept consists of 2 parts – the cabin with the seats, batteries and the main controls and the second – the brakes, the electric engines and the rest of the technical parts.
The great thing about it is that if any part of Firanse R3 gets damaged, it could be easily re-projected and printed again. This makes the car’s parts reusable and the possible damages – not so scary anymore.